Description
Product Description
How to Install the Repeater?
Plug it into socket1. Choose suitable placement and plug it into socket. 2. When it is on, reset it. |
Connect repeater’s wifi via cell phone1. Open your phone’s wifi set-up window. 2. Connect the repeater’s wifi. |
Set up the repeater via browser1. Open your browser and key in 192.168.0.1 2. Go into wizard and set up it step by step: a. the default account and password both are admin b. Choose the existing wifi what you want to relay c. set up its wifi password which should be same with the existing wifi. |
Connect the repeater’s wifi againConnect the repeater’s wifi after configuration is done. And then you could enjoy surfing even in dead zone. |
Warning!!!
The repeater is not a routerPlease notice: the repeater does not include router function. Please do not use it as a router. It can only extend existing WiFi’s signal range. |
Make sure at least 60% signal received by the repeaterPlease make sure that the placement of repeater should be covered by at least 60% signal strength of existing WiFi. |
Avoid inteferenceWave oven, washing machine and other electric appliances may affect the repeater’s performance. Especially, main wall which include steels may decrease its siganl dramatically. Please avoid these between the repeater and the place which you want relay to. |
IP conflictSometimes, perhaps you cannot go into the wizard, which is caused by IP conflict. Please log into your router’s wizard and change its IP as 192.168.1.1 or 192.168.2.1. |
Features : “This upgrade Version WPS Wireless-N Repeater is mainly used for providing free WiFi service at your home and office etc. Want to see your favorite online TV Show but the TV is on the dead zone? Your long and old house cut your video call with your friends? The bell can not work because it can not receive wifi? Now, say goodbye to dead zone with this MakeTheOne wifi repeater.Enough of no wifi!”
Application : Setting up a Wireless Infrastructure Network , For a typical wireless setup at home (as shown below) , please do the following : Wireless Repeater Mode : You will need WiFi AP/Router internet access ,plug the wifi extender to a power slot , after configuration to be an access point Wireless ap Mode : You will need broadband Router internet access , Connect the wifi repeater to your router/switch with RJ-45 Cable Color : Polish White Frequency range : 2.4-2.4835GHz Wireless transmit power : 14 ~17 dBm (Typical) Power supply unit : 100V-240V AC Wireless Signal Rates With Automatic Fallback 11n : Up to 300Mbps(dynamic) ; 11g : Up to 54Mbps(dynamic) ; 11g : Up to 11Mbps(dynamic) Modulation Technology : DBPSK , DQPSK , CCK , OFDM , 16-QAM , 64-QAM
Receiver Sensitivity 300M : [email protected]% PER 11M : [email protected]% PER 150M : [email protected]% PER 6M : [email protected]% PER 108M : [email protected]% PER 1M : [email protected]% PER 54M : [email protected]% PER
Package Includes : 1 x Wireless Wifi Extender Repeater 1 x RJ-45 networking cable(1 Meter length) 1 x user manual